BusBound

V8D-K Key Set

BusBound - Key Control Box Module

Module Overview

The V8D-K key module is the most simplified model in the entire ecosystem. It consists of only a V8D control box and a key module. It supports EliteDrive driver and can automatically synchronize hardware status.

It has 4 mounting screws on the bottom, making it easy to install on aluminum profiles. The key module can be installed upright or inverted, with diagonal mounting using two screws to achieve 45-degree angle installation.

Users can later upgrade to other advanced models by paying the price difference!

Module Overview

Connection Method

1. Connect the key module to the V8D-K control box via RJ11 cable
2. Connect the control box to the computer using a Micro USB data cable
3. The EliteDrive driver must be installed
4. The driver will automatically detect the V8D-K control box
5. The driver can automatically switch its working mode to adapt to different games
6. The driver program must be running each time you use the key module (it can be minimized)

Usage Instructions

The key module has three positions:

• OFF - Vehicle power off
• ON - Vehicle powered, dashboard activated
• START - Start engine, auto-returns when released

In the EliteDrive driver menu, make sure to check the "Use Key Module" option

Shortcut Binding

The key module uses the game's default numeric keypad * hotkey to control vehicle power and ignition. Restore the default hotkeys and do not bind the hardware directly.

Troubleshooting

Q Key module not working in game
A Check whether "Use Key Module" is enabled in the EliteDrive driver menu, and confirm the in-game shortcut bindings match the game's default settings
Q Cannot bind shortcuts
A The key module is controlled via keyboard shortcuts — bind them using the keyboard in the game's settings, not directly through the hardware